WIDIA - Полный каталог инструмента - 2017
для размещения заказа - zakaz@widiahanita.ru
Standard Cut Styles
Standard Cut (Right-Hand Spiral)
The WIDIA™ standard (right-hand spiral) cut
produces a smooth nish for general-purpose
use on steel, cast iron, and other ferrous and
non-ferrous materials.
Most WIDIA carbide burs are available in the
right-hand spiral design.
Master Cut (Double Cut)
The WIDIA exclusive master cut, with its chisel-type cutting
edge, is a machine-ground tool built to exacting tolerances
of concentricity, size, and shape. This accuracy, when
combined with precision grinders, results in smooth-running,
fast metal removal, and ne nishes. The right- and left-hand
helical utes combine to produce a chisel-type cutting tooth.
This results in faster penetration and stock removal with
minimal bounce or chatter.
The master cut design also produces an easy-to-handle
granular-type chip in most metals, as opposed to the
conventional sliver-type chips.
Throughout its life, the master cut gives faster stock removal
and less operator fatigue, and maintains a good nish on the
widest possible variety of workpiece materials.
Special Cut Styles
Coarse Cut
Coarse cut burs are favored for applications in softer
materials such as brass, lead, annealed low-carbon steels,
and some aluminium alloys. The combination of fewer utes
with greatr depths provides the chip clearance necessary
for these materials.
Available as specials.
Fine Cut RHS
The WIDIA ne cut right-hand spiral is used in applications
where stock removal is light and workpiece nish is critical.
A greater number of utes reduces chip load and provides
excellent control in deburring small, intricate areas.
Available as specials.
Aluminium Cut
The WIDIA aluminium cut burs are outstanding
on soft or non-ferrous type materials. Use the
aluminium cut design on aluminium, magnesium,
brass, lead, and most plastics.
How to select a Bur
Applications
Efcient stock removal — deburring,
nishing, and cleaning.
Ferrous metals
Non-ferrous metals
Material
Heavy stock removal — deburring, milling,
cleaning, and machining.
Non-ferrous metal: aluminium alloys
Plastics
Medium stock removal — deburring,
milling, cleaning, and nishing.
Medium stock removal — deburring,
milling, cleaning, and nishing.
Non-ferrous metal: aluminium alloys
Plastics
Hard rubber
Non-Hardened steel >45 HRC
Hardened steel >45 HRC: stainless steel
High-temperature resistant metals: nickel, cobalt, titanium
Non-ferrous light metals: brass, copper, and zinc
Hardened >45 HRC: cast iron
Light stock removal — ne deburring
and ne nishing.
Hardened stel >45 HRC
Cut
Double Master Cut
Aluminium Cut
Coarse Cut
Special Cut Style
Single Cut
Fine Cut
Special Cut Style
zakaz@widiahanita.ru
www.widiahanita.ru
R3