WIDIA - Полный каталог инструмента - 2017
для размещения заказа - zakaz@widiahanita.ru
WIDIA™ Inserts
Victory Toughness/Wear Resistance
WP Grades for Steel
• Three grades and seven primary
geometries for use in roughing to
finishing operations.
• Increase cutting speed and/or
feed rate to gain productivity.
toughness
toughness
WM Grades for
Stainless Steel
• Two grades to cover all of your
cast iron turning operations.
• Increase cutting speed and/or
feed rate by up to 30% over similar
competitive grades.
toughness
WK Grades for Cast Iron
• Three grades across 12 geometries for
use in roughing to finishing operations.
• Very good balance of wear resistance
and toughness for long predictable tool
life. Flat top geometry for machining
cast iron. For finishing to roughing
applications.
toughness
WS Grades for
High-Temp Alloys
• Two grades for use in roughing
to finishing operations.
• Very good wear resistance for
longer tool life.
• One uncoated grade for use
in titanium.
Positive and Negative Inserts
Positive Inserts
• Screw-on inserts are the first choice for
I.D. turning of all materials and O.D. turning
on small to medium lathes.
• Suitable for all workpiece materials.
Negative Inserts
• Negative style inserts are your first choice for general
machining of all materials on medium to large lathes.
• Negative style inserts offer the best economy for high
metal removal rates.
• Available in flat-top and chip-control geometries
with both moulded and ground peripheries.
• Suitable for all workpiece materials.
Ceramic Inserts
• Ceramic inserts are a great choice for productive
machining of high-temp alloys.
• Negative rake inserts are also recommended for
the machining of hardened materials and cast irons.
• Available in flat-top geometries with moulded and
ground peripheries.
PcBN and PCD Inserts
• PcBN can be used for machining steels with a hardness
higher than 48 HRC.
• PcBN inserts can also be used for productivity improvements
in machining cast irons and high-temp alloys.
• PCD inserts are used for machining non-ferrous materials.
zakaz@widiahanita.ru
www.widiahanita.ru
B7