WIDIA - Полный каталог инструмента - 2017
для размещения заказа - zakaz@widiahanita.ru
Copy Mills • M270™ Series
Recommended Starting Feeds
Recommended Starting Feeds [mm]
Light
Machining
General
Purpose
At 0,90 Axial Depth of Cut (ap) • HF16
Insert
Geometry
HF
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae)
5% 10% 20% 30% 40–100%
1,03 1,60 3,34 0,69 1,00 1,50 0,50 0,71 1,03 0,43 0,61 0,88 0,39 0,56 0,80
Heavy
Machining
Insert
Geometry
HF
At 0,90 Axial Depth of Cut (ap) • HF17
Insert
Geometry
HF
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae)
5% 10% 20% 30% 40–100%
1,06 1,63 3,00 0,71 1,03 1,52 0,51 0,73 1,05 0,44 0,63 0,90 0,40 0,57 0,82
Insert
Geometry
HF
At 1,10 Axial Depth of Cut (ap) • HF20
Insert
Geometry
5%
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae)
10% 20% 30%
40–100%
HF 1,01 1,69 2,74 0,69 1,09 1,57 0,50 0,78 1,10 0,44 0,67 0,94 0,40 0,61 0,86
NOTE: Use “Light Machining” value as starting feed rate.
Insert
Geometry
HF
zakaz@widiahanita.ru
www.widiahanita.ru
M129