WIDIA - Полный каталог инструмента - 2017
для размещения заказа - zakaz@widiahanita.ru
Grades and Grade Descriptions
A/B Series
Coating
HW-S25
HC-S25
Coatings provide high-speed
capability and are engineered
for nishing to light roughing.
P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Grade Description
Uncoated carbide. A very tough, ultra-fine grain unalloyed substrate.
For general-purpose machining of most steels, stainless steels, high-temperature
alloys, titanium, irons, and non-ferrous materials. Performs best at low speeds and
will handle interruptions and high feed rates. Use when C2, C3, or C25 fail
due to chipping or breaking.
wear
resistance
toughness
05 10 15 20 25 30 35 40 45
P
M
K
N
S
A PVD-TiN-coated grade. Straight 9.5% Co substrate. Submicron grain. For
general-purpose machining of most steels, stainless steels, high-temperature alloys,
titanium, irons, and non-ferrous materials. Performs best at low speeds and
will handle interruptions and high feed rates.
P
M
K
N
S
BN-H25
PcBN tip brazed onto a carbide insert. Recommended for machining hardened
steel (45–65 HRC). Use on bearing steel, hot and cold work tool steels, high-speed
steels, die steels, case-hardened steels, carburised and nitrided irons, and some
hard coatings. Can be run both dry and wet.
H
zakaz@widiahanita.ru
www.widiahanita.ru
D65