WIDIA - Полный каталог инструмента - 2017
для размещения заказа - zakaz@widiahanita.ru
Technical Information
Grade Selection Chart
Suggested Grades and Speeds for Threading
Various Workpiece Materials
workpiece group
workpiece material
free-machining
carbon steel
plain carbon steel
alloy steels/tool steels
150–325 HB
(up to 35 HRC)
alloy steels/tool steels
330–450 HB
(36–47 HRC)
martensitic/ferritic
stainless/precipitation
hardening
austenitic stainless steel
grey cast iron
135–270 HB
10L18, 10L45, 1213, 12L13,
12L14, 1140, 1141, 11L44,
1151, 10L50
10063, 1008, 1010, 1015,
1018, 1020, 1025, 1026,
1108, 1117
1042, 1045, 1070, 1080, 1085,
1090, 1095, 1541, 1561, 1572,
5140, 8620, W1, O1, S1, P20,
H13, D2, A6, H13, L6
416, 420F, 440F, 405, 409, 429,
430, 434, 436, 442, PH
201, 202, 301, 302, 303, 304,
304, 305, 321, 347, 348, 310,
314, 316, 316L, 330
class 20, 30, 35, 45
recommended surface speed — SFM
uncoated
PVD coated
THM
TN6010
TN6025
—
91–98
45–198
—
76–198
45–175
—
76–198
38–167
— 61–160 —
—
45–160
30–120
61–106
61–198
46–137
61–91
61–237
46–122
grey cast iron
275–450 HB
class 50, 55, 60
45–76
45–175
15–76
alloy/ductile iron
free-machining
aluminium alloys
high-silicon
aluminium alloys
copper/zinc/brass
non-metallics
high-temperature alloys
125–269 HB
(up to 27 HRC)
high-temperature alloys
260–450 HB
(26–47 HRC)
A536, J434C, 60-40-18,
80-55-06, 100-70-03
2024-T4, 2014-T6, 6061-T6
2011-T3, 3003-H18, A2, Alcan,
Alcoa 510, Duralumin
A380, A390, A380-1,
A390-1, A380-2
Graphite, Nylon, Plastics,
Rubbers, Phenolics, Carbon
Nickel 200, Monel, R405,
Monel K500, INCONEL 600,
INCONEL® 625/901x750/718,
Waspaloy, Hastelloy C
Rene 95, Waspaloy A286,
Incoloy 800, Haynes 188,
Stellite F, Haynes 25
45–76
122—244
—
76–183
122–457
24–37
24–30
45–650
122—265
—
76–304
122–396
24–122
30–76
100–525
—
—
46–236
46–305
13–76
6—61
titanium alloys
Ti-6AI-4V, TI-5AI-2.5Sn
34–55
34–99
—
NOTE: When workpiece hardness levels are at the top of a range, starting m/min
should be at the lower end. Regularly inspect insert clamps for worn ats.
Edge preparation:
Uncoated — sharp
PVD coated — light hone except positive top rake,
top rake-sharp
zakaz@widiahanita.ru
www.widiahanita.ru
F81