WIDIA - Полный каталог инструмента - 2017
для размещения заказа - zakaz@widiahanita.ru
WMT™ Turning, Grooving, and Cut-Off
Grades and Grade Descriptions
Coating
HC-P15
HC-P30
Coatings provide high-speed
capability and are engineered
for nishing to heavy roughing.
P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
wear
resistance
toughness
Grade Description
05 10 15 20 25 30 35 40 45
P
An advanced PVD-TiAlN coating over a very deformation-resistant unalloyed carbide
substrate. The WU10PT™ grade’s new and improved coating enables speeds to be increased
by 50–100%. The WU10PT grade is ideal for finishing to general machining of most
workpiece materials at higher speeds. Excellent for machining most steels, stainless steels,
cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs
well machining hardened and short chipping materials.
M
K
N
S
H
An advanced PVD-TiAlN-coated grade with a tough, ultra-fine-grain, unalloyed substrate.
For general-purpose machining of most steel, stainless steels, high-temperature alloys,
titanium, irons, and non-ferrous materials. Speeds may vary from low to medium and will
handle interruptions and high feed rates.
P
M
K
N
S
H
HW-K15
HC-P10
HC-P25
A hard, low binder content, unalloyed WC/Co fine-grained uncoated grade. Exceptional
edge wear resistance combined with very high strength for machining titanium, cast irons,
austenitic stainless steels, non-ferrous metals, non-metals, and most high-temperature
alloys. Superior thermal deformation and depth of cut notch resistance. The grain structure is
well controlled for minimal pits and flaws, which contributes to long, reliable service.
M
K
N
S
A specially engineered, proprietary, cobalt-enriched carbide grade with thick K-MTCVD-TiCN
coating layer, an Al2O3 layer of controlled grain size, and outer layers of TiCN and TiN for
maximum wear resistance. An excellent finishing to medium machining grade for a variety of
workpiece materials including most steels, ferritic and martensitic stainless steels, and cast
irons. The specially engineered cobalt-enriched substrate offers a balanced combination of
deformation resistance and edge toughness, while the thick coating layers offer outstanding
abrasion resistance and crater wear resistance for high-speed machining. The smooth
coating provides good resistance to edge build-up and microchipping and produces
excellent surface finishes.
P
K
A tough cobalt-enriched carbide grade with a newly designed multilayer K-MTCVD TiCN-
Al2O3-TiCNTiN coating with superior interlayer adhesion. This is the industry’s best
general-purpose turning grade for most steels and ferritic and martensitic stainless steels.
The substrate design, with cobalt-enrichment, ensures adequate deformation resistance
along with excellent bulk toughness and insert edge strength. The coating layers offer
good wear resistance over a wide range of machining conditions. The smoothness of the
coating leads to reduced frictional heat, minimises microchipping, and improves
workpiece surface finishes.
P
K
zakaz@widiahanita.ru
www.widiahanita.ru
E11